Complete Engine Development
Here at MotoGP Werks we evaluate and develop the engine from top to bottom, this is the platform for producing power above and beyond that of just a top end service. It establishes a solid foundation for applying massive power increases. All of our racing and high performance engines are custom built. Below you'll find the general range of work for any given application. The full extent and specific details of your engine package will be determined, after an initial consultation. This service includes, but is not limited to the following:
- Complete - teardown and detailed inspection
- Replace – any / all necessary gaskets, seals, o-rings, etc.
- Replace – any / all worn or marginal parts at or near service limit
- Replace - all piston rings, main bearings, rod bearings and associated hardware
- Prepare / service - cylinders as needed (de-glaze/re-hone/re-bore/re-plate)
- Prepare / service - ALL components and systems as needed
- Complete - data collection, evaluation & development
- Complete - integration of all planned work / components
- Rework / optimize – transmission / shifting mechanism as needed
- Rework / optimize - connecting rod/crankshaft assembly as needed
- Modify / optimize - piston crowns (design new piston if needed)
- Modify / optimize - piston skirts (design new piston if needed)
- Plot / set - optimum deck height and compression ratio
- Integrate / apply – optimum cylinder head work
- Evaluate / select - appropriate camshafts for application
- Plot / set - optimum camshaft timing (degree cams)
- Complete - engine blue-printing
- Complete - engine lightening/balancing
- Component - stress-relief & strengthening
- Reduce - internal frictional losses
- Reduce - thermal fatigue of internal components
- Enhance - cooling & lubrication efficiency
- Extensive - structure preparation / flex management
